Xyron PRO 1255 XM1255 Operation & User’s Manual

1, The XM1255 is an economical and easy to use document finishing system. This versatile and non-electric system has been designed to laminate or apply mounting adhesive to a variety of media. The same system is capable of laminating, selectively applying adhesive or applying laminate and adhesive a…

2, Features & Functions Input Tray Used to guide items into the machine. Leading edge of document should slide underneath paddle for best results. Tray has extendable "arm" for use when loading long items. Arm is shown closed. Top Cover Opens up for cartridge replacement (see…

3, Xyron PRO 1255 XM1255 Input Tray 1 5 Remove the XM1255 and crank the handle from the packaging. 1. (1) 6” Piece of Corrugate Box material [Use a piece of the supply cartridge carton flap] 2. Tools included – None required Assembly Instructions 1. When ready to assemble the Crank Handle onto the XM1255 machine, ins…

4, Basic Operation Trim to desired length using the cut blade at the roller exit. Apply downward pressure on the orange blade holder and slide to the left or right. TIP To save a later trimming operation, turn the crank to advanced the document until the leading edge is aligned wit…

5, Available Supply Roll Adhesive Application Roll Set Lamination Cartridges Combination One Side Laminate / One Side Adhesive Application Cutter Permanent High-Tack Adhesive: Extremely aggressive adhesive instantly creates a permanent bond on most surfaces. Sets instantly and will not peel. Acid…

6, Cut blade does not cut Adhesive build-up on Use caution and follow cleaning smoothly. cutting mechanism. procedure listed below. Film does not exit Material is curled or Remove material and clean dispenser between upper adhesive has been trans- adhesive from rollers if necessary. and lo…