Wespot SecNurse Operation & User’s Manual

15, - 15 - 3. Installation Configuration position 2. Above the long side of the bed 1. 2. 3. 4. 5. 6. 7. Turn off the sensor, i.e. press down the ON/ OFF button. Green LED is turned off. Place the remote control in the farther corner of the head end, according to the figure a…

7, Wespot SecNurse - 7 - 2. Equipment Indication of parts ON/OFF button The red button activates and deactivates the sensor. See chapter 4, Using the sensor Installation buttons These buttons are used during the installation to con- figure the bed zone. See chapter 3, Installation. Timer and …

25, - 25 -- 25 - 6. Maintenance Clean the sensor The sensor should be cleaned with a damp cloth. Do not use any kind of cleaning product. Please handle the sensor with care and prevent the optics from being scratched. Test once a week Once a week a sensor test should be made according to the func…

16, - 16 - 3. Installation - 17 - Adjust the sensor to the individual Different patients have different needs. Some patients run a large risk of injury and should not walk unattended, while other patients can manage to take care of themselves. The SecNurse can be configured to fulfil the dem…

10, - 10 - 3. Installation - 11 - Fasten the mounting bracket Fasten the mounting bracket on the wall, thereafter the sensor can easily be snapped on the bracket. A B Mounting position 2. Above the long side of the bed Fasten the mounting bracket on the wall. It is very important that the mou…

6, - 6 - 2. Equipment - 7 - Standard order configurations SecNurse, including EU power supply unit, connectors & cables SecNurse-EUCD EU power supply 12V DC with C + D SecNurse-EUCE EU power supply 12V DC with C + E SecNurse-EUCF EU power supply 12V DC with C + F Sec…