Z-Wave T100R Installation Manual

6, DCN: 140-01773-01 Page 6 Installer Settings Summary Setting Range Default Display Lock Y or N N Locks out front buttons Service Mode Submenu Test Mode Y or N N Reduces delays for testing System Settings Submenu Mechanical Settings Submenu Sys Type Std or HP Std Fan Type Gas or Elec Gas C/O Type w/…

2, DCN: 140-01773-01 Page 2 INSTALLATION HVAC System Setup The thermostat requires that you setup the type and configuration of your HVAC system for proper operation. This is done in the Thermostat Info screen Setup button or the Installer Settings screen on the thermostat. The Ins…

1, DCN: 140-01773-01 Page 1 Installation Guide Model T100R Z-Wave Thermostat This thermostat is compatible with most HVAC systems, including the following: 24VAC systems Note: requires both the 24R and 24C (common) wires Standard gas/oil/electric heating syst…

8, DCN: 140-01773-01 Page 8 Heat Pump HVAC System Thermostat Connection G Fan W1 Aux Heat Y1 Compressor Stage 1 R 24VAC Return C 24VAC Common Y2 Compressor Stage 2 O Change Over Valve For Heat Pump systems, connect the 24R connection to either the 24RC or 24RH Y1 G Y2 RS2 RS2…

4, DCN: 140-01773-01 Page 4 Delta Settings : The Delta T Setting is the delta, or difference between, the setpoint and current temp for determining when a heat or cool call comes on. The “delta” is the number of degrees away from setpoint . H/C Delta Range: 3 - 15 degrees. D…

3, Z-Wave T100R DCN: 140-01773-01 Page 3 thermostat connects to help determine this. If the original system had an orange wire connected to an “O” terminal, then you have a “changeover with cool” system. If you have a brown wire connected to the “B” terminal, then you have a “change over wi…