Ronan Engineering X96S Instructions And Operating Manual

62, 58 SPECIFICATIONS MODEL X96S Process Computer: Microprocessor-based unit wit a liquid crystal display, push-button interface, HART ® Communications, process control outpus, process condition inputs, serial communications. Chassis: 19” Rack Mount, Surface Mount or Panel Mount Enclos…

28, 24 Analog Out Cnfg Menu The Analog Out Cnfg menu is used to set where the source of power is internal or external. It contains the following items: ITEM FUNCTION Pwr Src Shows, and allows the user to set where the source of power is internal or external. Pwr Src has the following options: Pwr Sr…

19, 15 Filtering Menu The Filtering menu is used to configure the parameters associated with the weight measurement filter. It contains the following items: ITEM FUNCTION Dyn Track Shows the current state of the dynamic tracking filter (enabled or disabled) and allows the user to change the…

50, Ronan Engineering X96S 46 High Calibrate (Continued) PROCEDURE (Option 3) An alternative to calibrating with process material is to use an absorber plate. The procedure is much the same as that used for a process calibration, the only difference is that instead of material being placed on the belt, the equivalent absorb…

49, 45 High Calibrate (Continued) PROCEDURE (Option 2) Placing a static load on the belt that you must weigh): Before proceeding, ensure that the belt is loaded with an up-scale loading at least 75% of maximum full scale loading. The up-scale loading may be obtained by placing a static load onto a stop…

61, 57 Options X96S Mechanical Chassis Part Numbers PART NUMBER DESCRIPTION X96S-N4-1 X96S NEMA 4 Enclosure, 6 Position, with Front Panel L.C.D. & Motherboard X96S-N4-2 X96S NEMA 4 Enclosure, 9 Position, with Front Panel L.C.D. & Motherboard X96S-SM-1 X96S Surface Mount, 6 Position…