ATX PWS-1419T Assembly Manual

30, ATX PWS-1419T The light source for most flat panel displays is a cold cathode fluorescent backlight. These backlights run on high AC voltage provided by an inverter that converts the supplied DC power to AC and steps its voltage up for start-up. Once the backlight is started, the inverter drops the voltage dow…

7, Optional Slim CD ROM Disk 1. Slim CD ROM interface board 2. CD ROM power cable (interface to power supply) 3. Audio cable (interface board to sound card or SBC Audio out) 4. Slim CD ROM The pin out may be different for other brand or version of CD ROM & …

19, Connect the signal cable and chassis cable before fix the SBC Fix the SBC with screw #2 Installing the Add-on Cards The chassis has 10 slot openings supporting up to nine (one is used by SBC) add-on cards. Follow these steps to install add-on cards Add-on card can be extremely se…

8, PWS 1419T Side Views Use the photo below to identify components and I/O ports that are accessible from the two sides of the BP-10 chassis. The illustration shows the external connectors and components of a completely assembled SBC system. Your subassembly has only knockout holes instead. …

35, POSITION H-SIZE: Adjustment of the vertical image size CKOCK PHASE: adjustment of the ADC sample pixel clock. H. POSITION: Adjusts the horizontal image position within the display area of the LCD. V. POSITION: Adjusts the vertical image position within the display area of the LCD. INFORMAT…