Sartorius CH1NE Operating Instructions Manual

33, 33 Example: Determine the length of an amount of electrical cable after weighing in the defined reference unit value Place empty container on the weighing instrument ) Tare the weighing instrument r(repeatedly, if necessary) Set the desired reference value (in this example, 2) Place a sampl…

28, 28 Operating: CW2P | CW2P | CW1NFS | CW2FS Storage Parameter The reference weight is saved when the weighing instrument has stabilized. “Stability" is defined as the point at which fluctuation of a measured value lies within a defined tolerance range. The narrower the tolerance rang…

21, 21 Example: Combics 1 plus: Weighing with varying tare values; generate printout of results, delete tare values e Switch on the Combics 1 plus The automatic self-test runs. Once a readout is shown, the Combics is automatically zeroed and ready to operate. With no load on the weighing instrument…

26, Sartorius CH1NE 26 Position the calibration weight on the weighing instrument The difference between the weight value and the true mass is displayed, with ± sign. External calibration Calibration record is printed, if adjustment was not performed and the process Nom. + 10000.0 g was stopped by pres…

30, 30 Operating: CW2P | CW2P | CW1NFS | CW2FS Add more parts to the container (in this example, 18 pcs) 0pt is displayed if automatic reference sample updating is enabled w Toggle the display from piece count to weight w< 2 sec. Toggle to Info mode Piece count is displayed w Toggle to the next disp…

103, 103 Accessories Combics full-range scales: Product Order No. Optional Interface Interface module (RS-232C) for UniCOM data interface YDO01C-232 Interface module (RS-485/422) for UniCOM data interface YDO01C-485 Profibus-DP module for UniCOM interface YDO01C-DP Bluetooth® wireles…