Vox Technologies KVM08 Operation & User’s Manual

12, Vox Technologies KVM08 INSTALLATION ~ 6 ~ 2.3 H ARDWARE I NSTALLATION Step 1 Set the DIP-switch for Auto-scan Interval and BANK Address. If you have only one KVM08, use the MASTER bank setting. If the KVM -08 you are using will be Daisy-Chained off another unit, use a unique s…

11, INSTALLATION ~ 5 ~ 2.2 S INGLE U NIT OR D AISY - CHAIN O PERATION KVM08 has the capability to be Daisy-Chained to 15 more units (for a total of 16), giving the user control over a maximum of 128 computers. Each KVM 08 unit is defined as a “BANK”. See the following diagram for more …

21, OPERATION ~ 15 ~ Pressing the ESC key exits the current screen. To view a different BANK, pressing the PAGE UP key goes to a previous BANK, while the PAGE DOWN key brings you to the next BANK. Once you have selected a computer on the menu, press ENTER to switch to that port. Pressing the TA…

5, TABLE OF CONTENTS CHAPTER 1 INTRODUCTION 1 1.1 SPECIFICATION 2 1.2 PACKING CHECK LIST 3 CHAPTER 2 INSTALLATION 4 2.1 PRODUCT DETAIL 4 2.2 SINGLE UNIT OR DAISY-CHAIN OPERATION 5 2.3 HARDWARE INSTALLATION 6 2.4 DAISY-CHAIN 10 CHAPTER 3 OPERATION 12…

23, ~ 17 ~ Do not press any keys on the keyboard while the selected computer is booting up. This is true for any PC, whether stand -alone or connected to a KVM08. Q : The computers boot up fine, but the keyboard does not work. A : Check the cables and make sure they are inserted prope…