VQ ActionCare CFC-170 Owner's Manual

1, Two resistance cables Floor plate Batteries for exercise meter Upright row bar Wrenches Bolts for upright row bar 7. 8. 9. 10. 11. 12. Owner’s Manual Short Stroke Mini-Bike Model No. CFC-170 Parts included in the box with the CFC-170 Short Stroke Mini-Bike: 1. 2. 11. 3. 7. 4. 5. 10. 8. 9. 6. Ma…

2, 2 1. First, attach the forward cross bar to the frame. Place bolts in both sides, then add washers and tighten the nuts. 2. Attach right pedal to crank. This pedal is marked “R” for right and tightens by turning clockwise. Tighten by hand and do not over- tighten. 3. Attach left ped…

3, VQ ActionCare CFC-170 3 7. You must remove the exercise meter to install the batteries. Pull up on the tabs on each side of the meter to lift it from the mounting base. 8. Install AA-size batteries into the back of the exercise meter and replace the battery cover prior to re-mounting the exercise…

4, 4 The first step to using your Mini-Bike is to attach it securely to the front crossbar of the Resistance Chair. The distance to the pedals can be adjusted by this knob. After selecting the distance, turn knob clockwise to lock it in position. This eliminates side-to-side m…

5, 5 When performing exercises that use the resistance cables on the upright row bar, you can place your feet on either side of the floor plate to prevent the main frame of the Mini-Bike from rising during the exercise. Functions and Operations Auto Start: As long as the machine is in …

6, 6 Pull off the battery cover and place two Size AA or UM-3 batteries into the battery housing on back of meter (see photo). Insure that batteries are correctly positioned and battery springs are in proper contact with batteries. Replace battery cover and insure it is tightly closed…