Whip Mix Pro 200 Operator's Manual

12, 12 Pro 200 Series Furnace Operations Manual Set Vacuum Level The factory setting for vacuum is 71 cm of mercury. The acceptable range is from 22 cm to 74–75 cm of mercury or 11.0 inches to 30.0 inches of mercury. If the furnace does not pull a minimum vacuum of 10 inches within 20 sec…

30, 30 Pro 200 Series Furnace Operations Manual High-Efficiency Vacuum Pump ProCal Pro Series Accessories …

1, Pro 200 Series Furnace Operators Manual Pro Press 200 Pro 200 Whip Mix Corporation • 361 Farmington Ave. • P.O. Box 17183 • Louisville, KY 40217-0183 USA 502-637-1451 • 800-626-5651 • Fax 502-634-4512 • www.whipmix.com …

14, 14 Pro 200 Series Furnace Operations Manual Saving Programs to a Flash Drive (Exporting) 1. Place the Flash Drive in the USB slot on the left side of the furnace with the shiny metal contact facing upward. 2. Select the Special Functions item from the Main Menu. 3. Turn the Selector Knob unt…

23, 23 Pro 200 Series Furnace Operations Manual Turn the Selector Knob until the desired program is displayed. If the table has not been lowered, do so now. Press the Start Program button to begin this program. Continue through this chapter to learn all of the displays and features available whil…

21, Whip Mix Pro 200 21 Pro 200 Series Furnace Operations Manual 8. Entry Temperature Entry Temperature is the temperature at which the table will close completely. The range of values is 25° C (77° F) to a maximum of 980° C (1796° F). Rotate the Selector Knob to select the temperature value,…