Specifications:104/104396-cdc655tz.pdf file (02 Oct 2023)
|
Clarion CDC655Tz CD Player PDF Owner's Manual (Updated: Monday 2nd of October 2023 02:12:21 PM)
Rating: 4.5 (rated by 79 users)
Compatible devices: DXZ665MP, DRX9255, DCZ625, DB566USB, DRX5675, DXZ935, DB346MP, VRX755VD.
Recommended Documentation:
H: Horizontal Align the installation selector le- vers on both sides of the unit with the “H” position. 45° V H 45 ° 30° 15° V H 45° V H 45° V H 45 ° 15° 15° 45° V H 45° 15° 30° V H 280-7326-00 6 DISC CD CHANGER WITH CD TEXT Owner’s manual Thank you for purchasing the CDC655Tz/RDC655Tz sys- tem. The CDC655Tz/RDC655Tz is designed incorporat- ing the latest digital technologies, while featuring a newly developed CD mechanism to achieve excellent perform- ance and good reliability. Please read this owner’s manual entirely before proceed- ing with installation. 1 FEATURES 2 PRECAUTIONS 1. This unit does not operate independently. The unit must be used with a source unit that has a cable connec- tion for CeNET wire bound (sold separately). 2. CD singles cannot be used. 3. ● The pickup, the heart of a player, is built in deep behind the door. Do not leave this door open for extended periods to prevent dust adhering to the pickup. ● When the inside of the car is very cold and the player is used soon after switching on the heater, dew may form on the disc or optical parts of the player and proper playback may not be possible. If dew forms on the disc, wipe it with a soft cloth. If dew forms on the optical parts of the player do not use the player for about one hour and the condensation will disappear naturally to allow normal operation. 4. While the system is in play, do not plug or unplug the cables as this will cause damage. 5. This unit is compatible with CD TEXT. When it is connected to a center unit suitable for CD TEXT display, CD TEXT can be displayed. (When it is connected to a center unit without CD TEXT function, CD TEXT can not be displayed.) 6. Do not expose the magazine to direct sunlight, the car heater or other sources of strong heat. Replace the CD magazine (CAA-355) with a new one if bent or otherwise damaged. 4 IDENTIFICATION OF PARTS 1 Installation selector levers 2 Eject button Press the eject button for ejecting the magazine. 3 Flip down door 4 CeNET terminal for input and output (13-pin) 5 Digital optical fiber output terminal 6 Address switch When connecting an CD changer and MD changer by CeNET, no more than 2 units can be connected. When both of them are CD, the address switch needs to be reset so that the address switch number is not the same for each. <How to change the address switch> 1. Rotate and change the switch using a fine-tipped screwdriver. 2. Rotate the switch until it clicks into position. 6 SYSTEM EXAMPLE Installation Procedure 1. Use the double seamed hexagonal bolts to fix the lead clamp and installation bracket to the unit (on both sides) in the desired direction of installation. <Vertical Position> <Horizontal Position and Suspending Position> 2. Use the wing nut to hold in place the installation bracket with bolt to the installation bracket, which is attached to the unit. Then affix the cushion rub- ber. <Vertical Position> <Suspending Position> <Horizontal Position> 9 TROUBLESHOOTING Loss of power Connection with the source unit is not recognized. Magazine cannot be loaded. “No Disc” sign appears when searching for discs. Noise, skipping Mechanism does not function. Magazine is ejected evenwhen inserted into the unit. Bad connection. The length of the CeNET cable wiring is more than 65.62 ft (20m). Address switch num- bers are the same. Magazine inserted wrongly. A magazine is already in the player. Distorted magazine. Disc inserted upside- down. Moisture or dirt on disc. The installation selec- tor levers are set to dif- ferent positions on both sides. The unit installation di- rection and the instal- lation selector lever po- sitions do not match. Disc bent or badly damaged. Disc is very dirty. Mechanical error. Disc holder is not cor- rectly inserted into the magazine. Check connections. Connect the cable again. Rewire the connection so that the length of cable is less than 65.62 ft (20m). When the 2 CD changers are connected, set the address switch so that they do not have the same address number. Refer to the “Exam- ple of address switch setting” in the section titled “IDENTIFICATION OF PARTS”. Insert correctly. Eject the magazine and insert the other. Buy New Magazine CAA-355. Read the section on “Inserting The CD” carefully and reinsert the CD correctly. Wipe disc free of moisture and dirt. Set the installation selector levers to the same position on both sides. Set the unit installation direction and the installation selector lever positions to match each other. When installed at an angle, change the installation selector lever to a position (H, 45˚, V) not prone to noise or sound loss. Compare with another disc. If bad, discard the damaged disc. Clean the disc. 1. Referring to section “INSTALLATION”, check the three angle of in- stallation selector levers are properly set. If not, set them at the proper position for the angle of installation. 2. Check whether The CD magazine can be ejected by pressing the CD magazine eject button, then insert a new CD magazine. Read the section on “Inserting the CD” carefully and reinsert the disc holder correctly. lf the same phenomenon still occurs after checking the above, or it is impossible to remove the magazine, please consult your local dealer. 10 SPECIFICATIONS Clarion Co.,Ltd. All right Reserved. Copyright © 1998:Clarion Co., Ltd. ● 6-Disc Capability ● CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling ● 8-Times Oversampling Digital Filter ● Dual 1-Bit D/A Converters ● Zero-Bit Detector ™ Mute Circuit ● 3-Beam Laser System ● Spring-Loaded Silicon Oil-Dampened Suspension System ● Eject Capability While lgnition-Off ● 120˚ Mounting Capability ● Optical Digital Output ● CD TEXT ● Dimensions: 8.9"(225mm)W × 2.5"(63mm)H × 6.6"(167mm)D • The unit may not operate when both CD changers are set to the same address switch number. • Never change the address switch during op- eration. Doing so can cause malfunction or breakdown. Do not change the address switch forcibly, because this may also cause malfunciton. • The CeNET cable wiring must be less than 65.62 ft (20m) in length. • Do not use address switch numbers “3” or “4”. 1 23 4 Not used. Address switch This unit is available for upgrade in various ways. When you want to upgrade the system, make sure that the upgrade unit fits and wire it correctly. CeNET cable Y-adapter Digital optical fiber cable MD changer Ferrite clamp Source unit RCA extension cable DPH7500z (Black) (Black) (Gray) (Gray) 8 INSTALLATION Prior to Installation 1. Before attempting to use this unit you must first remove the packing safety lockscrews (3 positions) with a screwdriver. Store these lockscrews care- fully so they can be used again if needed. Note: • Reinstall these lockscrews when shipping the unit back for repair. English Frequency Response : 5Hz~20kHz(±1dB) Signal-to-Noise Ratio : 105dB(1kHz)IHF•A Wow and Flutter : Below measurement limits Power Supply : DC14.4V (10.8~15.6V) negative ground Current Consumption : Less than 1A Unit Weight : 3.74lb. (1.7kg) Dimensions : 8-7/8"(Width) × 2-1/2" (Height) × 6-9/16"(Depth) [225mm(W) × 63mm(H) × 167mm(D)] ∗Due to improvements, the design and these specifications may be modified without prior notice. Caution 3 CAUTIONS ON HANDLING CDs • ONLY use the magazine included with the CDC655Tz, RDC655Tz, CDC655z or RDC655z. For addi- tional magazines, purchase Clarion Model CAA335. Do not attempt to insert different style magazine into the CD changer even if they fit into the magazine opening. Inserting other manufacturers’ maga- zines or previous Clarion 6 Pack style magazines into the CDC655Tz, RDC655Tz, CDC655z or RDC655z will cause damage to the mechanism and void the warranty. Caution 1 23 4 Address switch ● Setting example 2 < Example of address switch setting> CD changer CD changer 1 2 Address switch number 1 Address switch number 2 Important Be sure that the CD changer numbers are not the same. Source unit CD changer MD changer Address switch number 1 Do not use address switch numbers “3” or “4”. Address switch number 1 1 1 ● Setting example 1 CeNET wire bound CeNET wire bound Source unit Important 7 INSTALLATION OF CONNECTORS Caution Note: Only the provided screws and brackets should be used during installation. Us- ing screws other than those specified will cause damage. • When the CeNET cable is connected, it must be inserted fully and securely. After connecting, fasten the cable using the cable holder or cable clamp. After connecting, fasten the cables with cable holders, etc. • When removing the digital optical fiber cable, rotate it to loosen it and pull it gently while holding the slide cap (a gray color part on the source unit). • Do not coil up the digital optical fiber cable with a radius of less than 1" (3 cm). With a radius of less than 1", the performance of the cable will be greatly impaired. • When installed in a glove box or console box, make sure that the source unit cables or cords do not interfere with the opening or closing of the flip down door. 5 CD MAGAZINE Inserting the CD 1. Turn the magazine over onto its back, put your finger on the disc holder release knob and draw out the disc holder. Magazine Disc holder Release knob The signal side of the CD Disc holder 2. Line up the CD with the groove of the disc holder. Make sure the label on the CD faces downwards. Note: • Do not place CDs in the disk holder from above. Caution • Pulling strongly on the disc holder may cause it to come out of the magazine. In such cases, press in on the disc holder tabs and re-insert into the magazine. Be sure that the disc holder is correctly inserted. Magazine Disc Holder Caution Handling ● New discs may have some roughness around the edge. The set may not work or the sound may skip if such discs are used. Use a ball-point pen, etc., to remove roughness from the edge of the disc. Ball-point pen Roughness ● Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. ● Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. ● Always handle the compact disc by the edges. Never touch the surface. • Look through the magazine opening and check whether or not the CD is tilted. If the CD is not in the slots on either side of the disc holder, either the mechanism or CD may be damaged. If the disc holder does not slide in fully, or slides with difficulty, it is possible that the CD is not correctly loaded. Reload in such cases. This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV tech- nician for help. ● Screws M5 × 8 W-SEMS CAUTION 1.Be sure to use the screws,etc., included in the package for installa- tion. Using other screws could damage the set. 2. Set the selectors on both side panels to the “H” Position when installing the set horizontally, to the “V” position when installing the set vertically. When installing at the angle of 45˚, set the selectors to the center click position. The set may be damaged if the selectors are not set to the proper positions. ISO 8 12V GROUND MODEL Clarion Co.,Ltd. MADE IN JAPAN THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI- TIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER- ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB- CHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN. CDC655z H V 45 ° 051 722 877 SERIAL No. CLASS 1 LASER PRODUCT MANUFACTURED: Use only compact discs bearing the mark and the mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Printed in Japan 1999/3 (To.K) PE-2300B / PE-2304B 280-7326-00 ● Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc. Storage ● Do not expose compact discs to direct sunlight or any heat source. ● Do not expose compact discs to excess humidity or dust. ● Do not expose compact discs to direct heat from heaters. Cleaning ● To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. ● Do not use any solvents, such as commercially available cleaners, anti-static spray or thinner to clean compact discs. ● After using special compact disc cleaner, let the compact disc dry off well before playing it. 2. Decide on the installation place and direction. 3. Insert an item such as a screwdriver with a fine point or the tip of a ballpoint pen into the round hole of the installation selector lever to switch to the position you need. 45° V H ∗ Before shipment from the factory, the levers are nor- mally placed in the horizontal position. 45˚: Slope Align the installation selector le- vers on both sides of the unit with the “45°” position. V: Vertical Align the installation selector le- vers on both sides of the unit with the “V” position. 3. Remove the floor carpet and decide on the place to install. Adjust the installation bracket with bolts to suit the place of installation. ∗The installation bracket with bolt may be broken off if it is bent many times at the perforated line. 4. Remove the separator of the cushion rubber that is attached to the installation bracket with bolt and install accordingly. 5. Unfasten the wing nut and remove the unit. 6. Return the floor carpet to its original place. Use a knife to cut into the carpet where the bolt can be felt, and allow the bolt to protrude from the carpet. 7. Align the unit with the bolts and secure it with the wing nuts. USE OF CONTROLS, ADJUSTMENTS, OR PER- FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CHANGES OR MODIFICATIONS NOT EX- PRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. INFORMATION FOR USERS:. CHANGES OR MODIFICATIONS TO THIS PROD- UCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Extracting the CD Take out the CD after pulling out the disc holder. Note: • When taking out the CD do not let your fingers touch the signal side of the CD. Inserting the Magazine 1. Open the flip down door. • Dust and other objects may cause malfunc- tions if they get into the unit. Always be sure to shut the flip down door once finished with loading or unloading the maga- zine. Caution Extracting the Magazine 1. Open the flip down door. 2. Press the eject button and take out the magazine. Eject button 3. Press in on the disc holder until it locks securely into the magazine. After loading a CD, make sure that it is correctly loaded. 2. Insert the magazine (facing up as shown below) into the unit with the CD load/unload side on the right. Press the magazine into the unit until it locks securely. 1. 2. 3. Close the flip down door. Note: • Never insert the magazine for 12-disc CD changer (CAA-122) into this unit because it can become stuck and impossible to remove. • Set the installation selector lever to the same position on both sides. • When the unit is installed below the horizontal position (up to 15 degrees) the ejected magazine, when left in that position, will drop due to vibrations from the car. • Adjust the installation selector levers into the correct locations. Setting the locations incorrectly or in varied positions will cause skipping. • Do not move the installation selector levers while the unit is in use. This will cause damage to the mechanism and the disc. Symptom RemedyCause Lever CeNET cable Digital optical fiber cableSlide cap CDC/RDC655Tz-E,E65 4/7/00, 2:51 PM1
Memorex Guidance Clock Radio MC7101 - CD Clock Radio (#55S1N4)
MC7101 - CD Clock Radio, 2, memorex/mc7101-cd-clock-radio.pdf
Fitness Electronics Document #18Y26X
MC0138, 2, vibro-shape/mc0138.pdf
Norand Reference Book: 6622 (#Y7VT17)
6622, 70, norand/6622.pdf
User Manual (SkyQuest XX12 Intelliscope Truss Tube Dobsonian 9793, #5CN65C)
SkyQuest XX12 Intelliscope Truss Tube Dobsonian 9793, 28, orion/skyquest-xx12-intelliscope-truss-tube-dobsonian-9793.pdf
Schonstedt Instrument Handbook: GA-52Cx (#M839FI)
GA-52Cx, 17, schonstedt-instrument/ga-52cx.pdf
#3HRS6G: 1069 Tutorial
1069, 148, stryker/1069.pdf
Epson Handbook: EMP-82e (#AU4JKT)
EMP-82e, 4, epson/emp-82e.pdf
Conceptsolutions Tutorial Paper Shredder PSC53 (#49W36U)
PSC53, 8, conceptsolutions/psc53.pdf
Automobile User Guide #YGO3US
Avalon 2003, 306, toyota/avalon-2003.pdf
Toshiba TV Manual (#8QI13J)
CF19H32, 31, toshiba/cf19h32.pdf
Notes on the control and power supply leadsThe power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner.When your car has built-in FM/AM antenna (aerial) in the rear/side glass, connect the power antenna (aerial) control lead (blue) or the access ...
Model & Doc Type: CDX-GT450U 2
DX-C34SERVICE MANUALSERVICE MANUALCOMPACT DISC CHANGERBlack modelMODEL DX-C34120V AC, 60HzBCDDRef. No. 3850122004RC-547CRC-547CNEXT SELECTIONDISC 1DISC 2DISC 3DISCDISC 4DISC 5DISC 6REPEATRANDOMMEMORYSEARCH>1010/0CLEAROPEN / CLOSEON STANDBY123456789FOLDER FOLDER65143COMPACT DISC CHANGERDX-C34SAF ...
Model & Doc Type: DX-C34 66
SERVICE MANUALCD CHANGERNo.49672Dec. 2001COPYRIGHT 2001 VICTOR COMPANY OF JAPAN, LTD.CH-X1100/CH-X1100RFCH-X1100/CH-X1100RFArea Suffix COMPACT DISC CHANGER12–DISCJ ------ Northern AmericaKS-RF100CH-X1100CH-X1100RF is a combination of CH-X1100 and KS-RF100KS-RF100 i ...
Model & Doc Type: CH-X1100 4
UNITILITE • UNITIQUTE • NAIMUNITI • SUPERUNITI NAC-N 172 XS • ND5 XS • NDX • NDS Spotify® Connect Supplement • Ergänzungsanleitung Spotify Connect Spotify Connect - Supplément • Bijlage voor Spotify Connect • Streamer Spotify Connect Suplemento Supplemento Spot ...
Model & Doc Type: UnitiLite 22
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | Kenwood | CD-2260M |
28 | 08/12 | ||
2 | PYLE Audio | PICL82 |
6 | 15/10 | ||
3 | Technics | SL-PG480A - schematics |
4 | 0.24 Mb | 16/11 | |
4 | NAD | C660 |
30 | 26/02 | ||
5 | Sony | DVP-FX930 |
39 | 6.73 Mb | 19/03 | |
6 | Philips | CDC265/01 |
17 | 19/04 | ||
7 | Philips | AZ5140 |
29 | 03/12 | ||
8 | Pioneer | DV-58AV - 1080p Upscaling DVD Player |
2 | 17/10 | ||
9 | Memorex | MC2864 |
25 | 20/12 | ||
10 | Sony | CDX-GT264MP |
2 | 0.22 Mb | 05/02 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | Haier | HVF042ABL |
44 | 1.92 Mb | 30.12.2023 | |
2 | Teufel | Cinebar Duett |
28 | 26.02.2024 | ||
3 | Outdoor Solutions | skeeter defeater |
8 | 08.03.2024 | ||
4 | Samsung | SCH-i830 |
2 | 0.61 Mb | 01.12.2023 | |
5 | Powr-Flite | PEB |
4 | 04.11.2023 | ||
6 | Albatron | PX848 Like Series |
48 | 1.96 Mb | 22.02.2024 | |
7 | Bosch | D7212GV2 |
12 | 28.03.2024 | ||
8 | MSI | RG70SE |
131 | 02.11.2023 | ||
9 | Generac Power Systems | 2400PSI |
20 | 1.22 Mb | 02.04.2024 | |
10 | LTV | LTV-S7204E-POE |
8 | 07.03.2024 |