Code Alarm CA100 Installation & Operation Manual

1, 05-04-06 CA100 1 MODEL CA100 REMOTE CONTROL AUTO ALARM SYSTEM INSTALLATION & OPERATION INSTRUCTIONS WIRING DIAGRAM Main 5 Pin White harness 6 Pin White Mini Connector Black Antenna Wire LED Indicator Valet Switch Blue Wire: (-) 200mA Unlock Pulse Green Wire: (-) …

2, 05-04-06 CA100 2 Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. Three long chirps & Three parking light flashes confirm exit. B. ALARM FEATURES PROGRAMMING: ALARM FEATURE “I” PRORAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and…

3, Code Alarm CA100 05-04-06 CA100 3 6. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor. a). Activate the warn-away (first stage the shock sensor), the siren will emit a short chirp. b). Activate the full alarm (second stage the shock sensor), the sire…

4, 05-04-06 CA100 4 The vehicle doors will automatically lock after passive arming cycle has been completed. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light will flash twice to indicating that the secu…

5, 05-04-06 CA100 5 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operat…