Vutec VT14X Installation Instructions Manual

10, Notes: 1 - Dashed wiring by installers. Wiring must comply with local and/or national electrical codes and regulations. 2 - The UP and DOWN limit switches are built-in motor limit switches. 3 - If replacing the toggle switch; the new switch must meet the following specifications: Contact rating…

5, 3 C - HANGING THE PROJECTOR LIFT The VU-PRO projector lift is designed to mount recess into the ceiling, supported by four 1/2 inch threaded rods (not provided) - see the data sheet at the end of this manual for dimensions. Dimension “SP” on the data sheet is based upon the 3/4” thick c…

3, Vutec VT14X 1 OVERVIEW The most common method of installing the VU-PRO projector lift is to suspend it on four, 1/2- 13 threaded rods, from any convenient overhead support. Vertical alignment and leveling is accomplished by individual adjustment of the threaded rods. Horizontal stability may be accomplishe…

1, Installation Instructions VU-PRO Models VT14X, VT18X, VT22X VIDEO PROJECTOR LIFT VIDEO PROJECTION SCREENS VUTEC 03/04/99 PL-MAN_ORG …

9, 7 6. Carefully, by trial and error, adjust the four hex bolts downwards, such that the they bring the ceiling closure panel into final location just as the lift stops it’s upward travel. 7. Tighten the hex nuts that secure the adjustment of the four hex bolts. 8. …