Uninterruptible Power Supplies PowerWAVE 9000 DPA Installation And Operating Manual

45, PowerWAVE 9000 DPA UPS - Installation 3-23 (Issue 2.1 Oct. 2009) 3.9 Interfacing Each UPS cabinet is provided with communication port on each single module and a communication card, which provides system information. On the Module: • JD1/RS232 Sub D9/male: SMART PORT Interface (…

97, Uninterruptible Power Supplies PowerWAVE 9000 DPA PowerWAVE 9000 DPA UPS - Specifications 10-1 (Issue 2.1 Oct. 2009) 10 Specifications 10.1 Mechanical. PowerWAVE DPA Frames CLASSIC DPA-25 TRIPLE DPA-75 UPGRADE DPA-125 Capacity Max. 1 module (10-25kVA) 200 x 7/9Ah batteries 3 modules (10-25kVA) 180 x 7/9Ah batteries 5 modules (10-25kVA) N…

67, PowerWAVE 9000 DPA UPS - UPS Module Replacement 5-1 (Issue 2.1 Oct. 2009) 5 UPS Module Replacement 5.1 Replacement of UPS Module in Single Module Systems ALL THE OPERATIONS IN THIS SECTION MUST BE PERFORMED BY AUTHORISED ELECTRICIANS OR BY QUALIFIED INTERNAL TRAINED PERSONNEL. BY OPENIN…

42, 3-20 PowerWAVE 9000 DPA UPS - Installation (Issue 2.1 Oct. 2009) 3.8 External Battery Cabinets and Battery Connections In the UPS-cabinet DPA 125 or DPA 250 there is no space provided for batteries, instead there are 2 external matching battery cabinets available: • CBAT DPA-120…

33, PowerWAVE 9000 DPA UPS - Installation 3-11 (Issue 2.1 Oct. 2009) Figure 3.4: Dual Input Block Diagram with Cable and Fuse Sizing Frame Power (kVA) Dual Input (3 x 400V) Output (3x400V, 0.8 pf) Battery Fuse B/ C (A) Cable B (mm 2 ) Cable C (mm 2 ) Max Input with battery charging (A) Ca…

75, PowerWAVE 9000 DPA UPS - UPS Module Replacement 5-9 (Issue 2.1 Oct. 2009) 12. Insert new UPS Module or cover the opening (UPS Module Compartment) with appropriate protection cover immediately and fix with four screws. WHILE THE UPS IS OPERATING IN THE MAINTENANCE BYPASS MODE THE LOAD IS …