QNO 4 WAN Operation & User’s Manual

68, 4WAN 12LAN Medium Scale Multi-WAN QoS Router 62 Block MAC address not on the list This method only allows MAC addresses on the list to receive IP addresses from DHCP and have Internet access. When this method is applied, please fill out Static IP with 0.0.0.0, …

160, 4WAN 12LAN Medium Scale Multi-WAN QoS Router 154 Enter ”Firewall-> General” and find the option "Prevent ARP Virus Attack" to the right of the page. Click on the option to activate it and click "Apply" at the bottom of the page (see illustrat…

134, 4WAN 12LAN Medium Scale Multi-WAN QoS Router 128 XIII. Log From the log management and look up, we can see the relevant operation status, which is convenient for us to facilitate the setup and operation. 13.1 System Log Its system log offers three options: system lo…

27, 4WAN 12LAN Medium Scale Multi-WAN QoS Router 21 Interface: An indication of which port is connected. Connection Type: Obtain an IP automatically, Static IP connection, PPPoE (Point-to-Point Protocol over Ethernet), PPTP (Point-to-Point Tunneling Protocol) or Transpa…

40, QNO 4 WAN 4WAN 12LAN Medium Scale Multi-WAN QoS Router 34 6.2 Multi- WAN Setting 6.2.1 Load Balance Mode Auto Load Balance Mode When Auto Load Balance mode is selected, the device will use sessions or IP and the WAN bandwidth automatically allocate connections to achieve load balan…

82, 4WAN 12LAN Medium Scale Multi-WAN QoS Router 76 Service Port： Choose the service port. IP Address： Input the IP address range or IP group. Enabled： Activate the rule. Add to list： Add this rule to the list. Delete seleted item： Remove the rules selected fro…