Sea & Sea MDX-7D Instruction Manual

10, 1 2 E-9 Identification of Parts CAUTION Finder Replacing the finder This product comes equipped with a 0.5x pick-up finder. The finder can be replaced with an optional finder unit so you can change the finder magnification to match your shooting conditions. Rotate the finder unit mounted on th…

21, E-20 Connecting the Strobe This product comes equipped with a strobe bulkhead (①) / a YS converter bulkhead (②) and two fiber-optic cable sockets. Remove the housing's bulkhead connector cap Make sure there are no scratches or debris on the O-ring of the sync cord being…

18, E-17 Mounting the Camera in the Housing パチン錠を閉める Removing the camera from the housing 1 Open the locking latches 2 Remove the rear case 3 Remove the sync connector from the camera's accessory shoe 4 Set the quick lock to the OPEN position 5 Slide the camera toward you as yo…

4, E-3 Safety Precautions Do not rest heavy weight on the product. It might deform the outer casing, damage internal parts, make the waterproofing fail, or result in fire or electric shock. Please note that some marks may be left on the camera scraping against the dials or gea…

20, E-19 Mounting the camera in the Housing 1 Open the locking latches 2 Remove the rear case 3 Set the quick lock to the OPEN position 4 Slide the camera toward you as you remove the front case Removing the camera from the housing Make sure that the O-ring is properly fitted in the O-ring groov…

26, Sea & Sea MDX-7D Lever AE lock button / Index / Reduce button AF point selection / Magnify button AF start lever Lever AF start button Housing Housing Housing External Controls E-25 AF start lever Push up the lever to operate the AF start lever. Camera Camera Camera AE lock / Index / Reduce / AF point s…