Uniwide XtremeServer 3526 Operation & User’s Manual

27, 24 3.2.3 Hard Disk Drives HDD ID Configuration HDD Type Slot #5 Slot #4 Slot #3 Slot #2 Slot #1 Slot #0 SATA ID 6 ID 5 ID 4 ID 3 ID 2 ID 1 SAS(SCSI) ID 5 ID 4 ID 3 ID 2 ID 1 ID 0 NOTICE When you install hard disk drive into the sy…

30, 27 4. BIOS and Jumper Setting 4.1 BIOS This chapter discusses the AMI BIOS Setup program built into the ROM BIOS. The Setup program allows users modifying the basic system configurations according to their requirements. This special information is then stored in bat…

43, 40 4.1.6 PCI PnP Menu PCI PnP Menu 1 PCI PnP Menu 2 …

80, 77 5.2.3.2.3 Creating s Second IM or IME Volume The LSI Logic SAS controllers allow you to configure two IM or IME volumes. If one volume is already configured, and if there are available disk drives, there are two ways to add a second volume. The first is as follows: ① In the…

72, Uniwide XtremeServer 3526 69 5.2.2.2 IM Features LSI Logic Integrated Mirroring and Integrated Mirroring Enhanced support the following features: z Configurations of one or two IM or IME volumes on the same LSI Logic SAS controller. Each volume can consist of two mirrored disks (IM) or three to eight mirr…

89, 86 The first is as follows: ① In the configuration utility, select an adapter from the Adapter List. Select the RAID Properties option. This will display the current volume. ② Press C to create a new volume. ③ Continue with step 4 of Section 5.2, “Creating IS Vo…