Kyocera Mita FS-8000CD Operation Manual

160, 4.4 Printing Using the Printer Driver 4-9 4.4 Printing Using the Printer Driver This section explains how to proceed with printing using the printer driver. The explanation below allows you to select the paper source, select the output device, etc., temporarily overriding the default se…

163, Kyocera Mita FS-8000CD 4.4 Printing Using the Printer Driver 4-12 Handling TrueType Fonts The TrueType Fonts in the Imaging tab specifies how TrueType fonts are sent to the printer. You may wish to use this function if you encounter problems in printing fonts. Figure 4-10 Color Mode, Color Correction, and Color Adjus…

71, 3.4 e-MPS 3-36 9 When the desired size is displayed, press the ENTER key. 10 Press the MENU key and the message display returns to Ready . Maximum Space Assigned to Virtual Mailboxes (VMB) This changes the hard disk space for virtual mailboxes. You can change the maximum space fr…

70, 3.4 e-MPS 3-35 Maximum Space Assigned to Permanent Code Jobs This changes the hard disk space that holds permanent code jobs. You can change the maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of free hard disk space, however. The default size is 1/6 of …

175, 5.3 Error Messages 5-7 5.3 Error Messages The tables on the following pages indicate how to respond to problems indicated by the operator panel indicators and messages. 5.3.1 Error Messages The following table lists errors and maintenance messages that can be dealt with by yourself. If Call …

61, 3.4 e-MPS 3-26 7 Press the ENTER key. The user name and the job name ( Agenda , in this example) entered in the printer driver appear with a blinking question mark ( ? ). 8 Press the U or V key to display the desired job title. 9 Press the ENTER key. The ID input line appears. Enter the four-dig…