Quadra-Fire GB40I Manual, Installation, Operation, Venting And Maintenance

15, Page 15 March 2000 GB 40 I - FIREPLACE INSERT INSTALLATION: DOOR 1. Verify that the proper door hook (part number 450-7490) is installed on the door. See Fig. A. 2. Install the door to check the latchbox adjustment. When closing the door, look between the door and the face of the sto…

20, March 2000 Page 20 GB 40 I - FIREPLACE INSERT 1. Before installing the insert, attach the spill tube extension. Pull tube towards front of stove then slightly to the right to unhook locking bracket (see Fig. 4). 2. Remove the flue collar assembly. 3. Refer to page 19 for insta…

5, Quadra-Fire GB40I Page 5 March 2000 GB 40 I - FIREPLACE INSERT SAFETY LABEL (As found on chain in lower front grill.) SAFETY LABEL GB40 -I NG GB40-I LP GAS-FIRED VENTED ROOM HEATER SERIAL NO. MANUFACTURED BY: 401 N. Wynne Colville, WA 99114 GB40-I (NG) GB40-I (NG) GB40-I (LP) GB40-I (…

24, March 2000 Page 24 GB 40 I - FIREPLACE INSERT LIGHTING INSTRUCTIONS LIGHTING FOR YOUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot that must be lit by hand using the piezo igniter. When lighting the pilot, follow these instructions exactly. B. BEFORE LIGHTING, smel…

16, March 2000 Page 16 GB 40 I - FIREPLACE INSERT THERMOSTAT INSTALLATION If desired, a thermostat may be installed to regulate the Quadra-Fire GB40-I. It is important to use a thermostat designed for millivolt operation. Do not connect this appliance to a thermostat serving any other applianc…