QMS QMS 1660 Reference Manual

38, » Note: You may need to press the Next key more than one time to advance through the list of options. The printer must be off line and idle before you can access the config- uration menu. Once you access the configuration menu, you use the control panel keys to move through the menu. Us…

196, window (DSK refers to the hard disk number, and CAR0 and CAR1 refer to the font card slot number). » Note: You may need to press the Next key one or more times to advance through the list of selections or options. After the option is installed, remove the card from the slot and place the print…

121, installed and formatted, they are not available until the disk cache cli- ent is increased. The disk cache is a high speed temporary buffer for data going to and from the hard disk. It can speed the printer in two ways: Information such as frequently referenced fonts and logos may still be in th…

195, automatically increases the disk cache size. See the “Memory” section in chapter 4, “Printer Configuration,” for more information. If your printer has more than 12 MB of RAM, increase the disk cache size (Administration/Memory/K Mem Disk Cache menu) to 256 KB. See the �…

75, QMS QMS 1660 Your QMS 1660 Print System comes standard with two media cas- settes. Using the control panel, you can select a default media input source, chaining these input sources, and name them. An option in the Operator Control menu allows you to select the default tray or cassette (inputbin) from w…

270, Fuser Assembly An assembly that contains two heated rollers between which the paper passes after toner has been applied; the heated rollers bond the toner to the paper. Gamma Correction Gamma corrections allow you to sharpen the midrange contrast when scanning black and white images. Gra…