Avery Weigh-Tronix RLP Installation And User Manual

5, 5 RLP Railweight Low-Profile Track Scale Installation and User’s Manual 1. Transit level 2. Spirit Level 3. 100 ft tape measure 4. Set of heavy duty ratchets/sockets 5. Hand tools for nuts and bolts up to 1 1/2" Dia. 6. Never-sieze grease 7. Shim material, 1/16" and 1/8" th…

13, 13 RLP Railweight Low-Profile Track Scale Installation and User’s Manual Installation of the Covers Testing Flush Deck Scale: A flush deck scale has special main covers that make the main beams of the scale flush with the rails. Install the main covers, the load cell covers, and then the …

12, 12 RLP Railweight Low-Profile Track Scale Installation and User’s Manual Verify the elevation and position of the scale and vertical alignment of the load cells. Grout the grout plates, using non-shrinking epoxy grout, while making sure that there are no air pockets. Pour concrete ballast in…

7, 7 RLP Railweight Low-Profile Track Scale Installation and User’s Manual Installation of the Base Plates Place the base plate on the grout plate. Use supplied washer plates, lock washers and bolts to hold the base plate in place, but do not tightem them completely at this time. The base plate wil…

16, Avery Weigh-Tronix RLP Weigh Bar ® is a registered trademark of Weigh-Tronix Inc. Avery Weigh-Tronix USA 1000 Armstrong Dr. Fairmont, MN 56031 USA Telephone: 507-238-4461 Facsimile: 507-238-4195 e-mail: [email protected] www.wtxweb.com Avery Weigh-Tronix UK Foundry Lane Smethwick, West Midlands England B66 2LP…