SeeEyes SC-HD04QS (D) Operation & User’s Manual

7, 6 The Alarm output provides the connect point to activate a warning lamp or alarm bell when an alarm is entered. ⑧-6. Alarm Output Contact Point The Alarm output contact point is under Normal Open relay of 1A/24VDC, 0.5A /125 VAC. ※ The relay may not activate properly wh…

13, 12 5-6. DATE/TIME SET 5-6-1. DATE FORMAT To set the date display format. DISPLAY SET > Go to DATE FORMAT by pressing (▲▼) buttons > Press (◀▶/+ -) buttons to set the FORMAT. 5-6-2. LOCATION To set the location of the date and time. DISPLAY SET > Go t…

12, SeeEyes SC-HD04QS (D) 11 5-4-3. SDI/VGA To set output port as SDI or VGA (Cannot output two signals at the same time) INPUT/OUTPUT SET > Go to SDI/VGA by pressing (▲▼) buttons > Press (◀▶/+ -) buttons to set the output port as VGA/SDI 5-4-4. CVBS To set the format of output video sign…

5, 4 3-1-2. SC-HD04QS (D) - Rear(connection port) ① SDI in X 4: Connect with the 4 of HD-SDI camera. ② SDI Loop thru out X 4: Connect the other devices. ③ Monitor(SPOT) Output: Connect the SD(standard definition) Video Monitor. - NTSC/PAL selectable for Monitor o…

6, 5 Connect the other devices[1920x1080, 1280x720P] ⑧ ALARM INPUT/ OUPUT Connect the alarm input/output port to control the split display screen by connecting a sensor or switch from outside. - Display mode per Foreign Alarm Input External input Display mode IN1…