Sega 32X Instruction Manual

3, Connecting the Genesis 32X If your Genesis set-up appears to the right, see "Connecting to the Original Genesis Model." If your Genesis set-up appears to the right, see "Connecting to the New Genesis Model." If you own a Genesis CDX, see "Connecting to the Genesis C…

8, To Connect Stereo Sound: New Genesis Model and Genesis CDX Stereo TV (or Stereo VCR) 1. Plug the single-end plug of the Sega Stereo Audio/Video Cable (sold separately) into the AV OUT Jack on the Genesis 32X. 2. Plug the yellow plug on the three-plug end to the Video Input Jack on your ster…

9, Troubleshooting No picture and sound: • Is the TV or monitor turned ON? • Are the AC Adaptors connected to the Genesis 32X, Genesis and Sega CD? • Are the AC Adaptors plugged into electrical outlets? • Are the Genesis 32X and Sega CD firmly connected to the Genesis? • …

4, Connecting to the New Genesis Model Please check the following before you connect your Genesis 32X to your new Genesis model: • Is your Genesis properly connected to your TV? • When using your Sega CD, is your Genesis connected properly to your Sega CD? If you answered "…

2, Sega 32X Unpacking your Genesis 32X Use the checklist below to make sure you have all the components of your Genesis 32X. • Genesis 32X Unit • Connector Cable • Conversion Cable • Sega Audio/Video Cable (mono) • Spacer for New Genesis Model • AC Adaptor • Electromagnetic Shield Plates…

7, Ending a Session When ending a session using cartridge software: 1. Turn OFF the Power Button on the Genesis. 2. Remove the cartridge holding down the Genesis 32X unit. 3. Unplug all AC Adaptors from the electrical outlets. When ending a session using CD software: Sega CD 32X software fun…