Huber unistat cc401 Operating Manual

31, 30 Comfort menu Here one can switch to the whole range of functions. Please also note the chapter on Comfort menu, where further functions of the comfort menu are described. Display modes Following functions are available: 1. Standard: Values are displayed numerically (v…

5, Huber unistat cc401 4 Quick guide for CC-thermostats Checklist for initial operation: 1. Make sure that the machine is connected correctly and enough thermal fluid is inside. 2. Switch on the unit via the mains switch! 3. Make sure that the over-temperature is set correctly. 4. Make sure that the …

27, 26 Main menu The following functions are available: Compact menu Comfort menu Control parameters Acoustic alarm Comfort menu Auto-Start Display modes Clock Enter program Com.G@te (with connected Com.G@te only) Overtemperature protection Compact menu Pump settings Comp…

37, 36 Compact menu Here one can switch to the limited possibilities of the compact menu. Compressor Automatic Corresponds to Function F35 in the Funct.-no. menu. This is used to select the operating mode of the compressor. The default setting is always on. Automatic: The comp…

41, 40 Set-point A description on this menu point can be found in the chapter on the Compact menu. Set-point limits A description on this menu point can be found in the chapter on Compact menu. Settings (others ) Here, information concerning your application may be entered or…

55, 54 F131 Display mode normal Choosing standard display mode. F135 Adj. analogue input (analogue interface input current adjustment) Fine adjustment of the 0/4-20mA or 0-10V input current range. Using this function the current limits of the 0/4-20mA or 0-10V analogue input signal can be …