PARKZONE VisionAire AS3X Instruction Manual

9, EN Transmitter Setup IMPORTANT: The AR635 receiver’s default setting is for 3D mode using the DX6i transmitter and above. If you choose to fl y using another transmitter, you must refer to the “receiver manual” for instructions. A DSM2/DSMX four-channel (or better) transmitter with dual r…

20, PARKZONE VisionAire AS3X © 2012 Horizon Hobby, Inc. ParkZone, VisionAire, AS3X, E-flite, Blade, Celectra, EC3, DSM, DSM2, DSMX, Bind-N-Fly, ModelMatch and SFG Technology are trademarks or registered trademarks of Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Futaba is …

5, ENEN 1. Press the latch button (A) and remove the battery hatch. 2. Apply the included strip of hook and loop tape to the bottom of your battery. 3. For the recommended CG, install the battery near the center of the com- partment, then press the battery onto the hook and loop strip (B) and c…

17, EN Declaration of Conformity (in accordance with ISO/IEC 17050-1) No. HH2012092701 Product(s): PKZ VisionAire BNF Item Number(s): PKZ6580 Equipment class: 1 The object of declaration described above is in conformity with the require- ments of the specifi cations listed …

10, EN Control Direction Test Transmitter command Aircraft Reaction Elevator Up Elevator Command Down Elevator Command Aileron Stick Right Stick Left Rudder Stick Right Stick Left Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and i…

16, EN What this Warranty Covers Horizon Hobby, Inc. (“Horizon”) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase. What is Not Covered This warranty is not transfera…