SGM Synthesis Wash 700 Operation & User’s Manual

22, GB SGM Technology for lighting User Manual 1.00 20 Synthesis I NSTALLING / REPLACING THE COLOR FILTERS Choose, in the color or effect wheel, which dichroic filters is to be replaced. Color filter removal: 1) Widen the disks fitted in the color wheel as indicated in pictu…

44, GB SGM Technology for lighting User Manual 1.00 42 Synthesis Shutter / Strobe (Ch8) DMX VALUE C ENTRAL VALUE F UNCTION 0 - 7 4 Closed 8 -15 12 Strobe at the frequence of 1 Hz 16 - 23 20 Strobe at the frequence of 1,38 Hz 24 – 31 28 Strobe at the frequence o…

17, SGM Technology for lighting GB Synthesis 15 User Manual 1.00 RS-232 CONNECTION For this connection, use good quality screened coax cable (RG58 50Ohms) to avoid problems with signal transmission and faulty fixture operation. Connectors must always be 5-pin XLRs. Refer to …

15, SGM Synthesis Wash 700 SGM Technology for lighting GB Synthesis 13 User Manual 1.00 C ONSTRUCTION OF THE SIGNAL CABLE Synthesis spot has a DMX 512 input fitted which uses standard XLR 5 Pins connector. For the connection use screened cables having the EIA RS-485 specifications with the follo…

14, GB SGM Technology for lighting User Manual 1.00 12 Synthesis 2.5 Fitting clamps  Always use two clamps to hang the fixture. Attention: if the fixture is suspended from a truss suspended above ground or floor level, fix the fixture with a steel safety cable.  F…

38, GB SGM Technology for lighting User Manual 1.00 36 Synthesis 4 MAINTENANCE 4.1 Ordinary Maintenance Synthesis is internally fitted with three indipendent modules and this grants more speed in case of technical operations or maintenance service. Synthesis head was designed acc…