SGM X Line IDEA WASH 575 Operation & User’s Manual

10, SGM Technology for Lighting GB WIT074 V1.0-01NR Idea Wash 575 8 DMX-512 control connection The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance with EIA RS-485 specifications and the following characteristics must be used for c…

11, GB SGM Technology for Lighting Idea Wash 575 WIT074 V1.0-01NR 9 Projector DMX start address selection All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture responds to the correct control signals. This digital startin…

21, SGM X Line IDEA WASH 575 GB SGM Technology for Lighting Idea Wash 575 WIT074 V1.0-01NR 19 INSTRUCTIONS ON USE: DMX channel´s functions and their values (16 DMX channels): Channel 1 - PAN movement 8bit : Channel 2 – Pan fine 16bit Channel 3 - TILT movement 8bit : …

25, GB SGM Technology for Lighting Idea Wash 575 WIT074 V1.0-01NR 23 CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. All screws for installing the devices or parts of the device have to be tightly connected and must not be cor…

13, GB SGM Technology for Lighting Idea Wash 575 WIT074 V1.0-01NR 11 Main functions - Main menu 0 1. Press [MODE/ESC] to enter the main menu "MODE" (display flashing) 2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing [UP] or [DOWN…

16, SGM Technology for Lighting GB WIT074 V1.0-01NR Idea Wash 575 14 - Delay lamp on With this function you delay the lamp ignition. 1. Select “DELA” by pressing [UP] or [DOWN] button. 2. Press [ENTER], the display shows “D-XX”,”XX” stands for the version number…