Wildgame W6E Operation & User’s Manual

18, Warranty FCC DISCLAIMERS WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products. WARRANTY You must register your product warranty online at www.w…

8, Setting Date Trigger Flextime Location 1. Press the center navigation button after setting the minute to change the Day. 2. Press the left or right navigation button to go up or down in sequence. 3. When the DAY is set, repeat steps 1 and 2 to set the Month and Year. 1. Press the center…

17, Retrieving Images (SD Card in Camera) Retrieving Images (SD Card reader) Method 1: Leave SD card in camera A. First, make sure that the camera is powered OFF. Next, plug the USB cable into the camera and then into the USB port on your computer. Once this is complete (in this order…

7, Power Save Power On Setting Time Test Mode After 30 seconds without any buttons being pushed, the LCD will turn off and camera enters into Power Save or Ready Mode. 1. 1. Check the battery level icon to ensure the batteries just installed contain the proper charge level. If so, you are…

11, Wildgame W6E PIR Mode 1. Press the center navigation button while PIR Mode is selected. The highlighted option will be blinking. Flextime period: 1. 15 min before Sunrise to 1 hour after Sunrise. 2. 1 hour before Sunset to 15 min after Sunset Flextime period: 1. 15 min before Sunrise to 1 h…