Wildgame W6EF Operation & User’s Manual

3, Includes Features USB Cable 2 - Bungee Cords User Manual Camera Unit RESOLUTION FLASH FLASH RANGE SENSOR SENSOR RANGE IMAGE FORMAT MEMORY USB IMAGE RESOLUTION POWER SUPPLY AUXILIARY POWER BATTERY LIFE ONBOARD POWER HOUSING MOUNTING MAX: 6 MP 20 High Intensity Infrared LED’s up to 40 feet Passi…

5, Installing Batteries Open the door at the bottom of the camera by unlatching the locking tabs. 1. With the camera facing open, open the battery compartment cover by sliding the latch to the left. (Illustration A and B) 2. With the bottom of the camera towards you, Make sure to …

16, page 15 page 16 FCC FCC STATEMENT Product Name: Game Trail Camera Trade Name: Wildgame Innovations Model# W6EF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must …

7, Power Save Power On Setting Time Test Mode After 30 seconds without any buttons being pushed, the LCD will turn off and camera enters into Power Save or Ready Mode. 1. 1. Check the battery level icon to ensure the batteries just installed contain the proper charge level. If …

9, Wildgame W6EF Setting Date 1. Press the center navigation button after setting the minute to change the Day. 2. Press the left or right navigation button to go up or down in sequence. 3. When the DAY is set, repeat steps 1 and 2 to set the Month and Year. page 7 page 8 Open Open PIR 1. …

15, page 13 page 14 Retrieving Images (SD Card reader) Method 2: Remove SD card and use card reader A. First, remove the SD Card from the camera unit itself by pressing on it to where it automatically ejects. B. Next, insert the SD card into your SD card reader. C. Once inse…