Will Burt AntennaMast AM2 Operator's Manual

9, 1 Base Tube Mast Tube Top Tube TOP BOTTOM www.willburt.com 22 33 44 To Ensure Safe Installation: 1. For the base of the deployed tripod, select a site that has no more than a 5 ° slope. Ensure that the center of the site is approximately .5m / 2 ft. square and is level …

2, www.willburt.com Document History Version Date Remarks TP-5000801-00 12/15/13 Original Release Will-Burt’s AntennaMast masts are portable, eld-erected masts. They are a fast and easy solution for elevating a variety of payloads, including antennas cameras and other sensors. …

34, Will Burt AntennaMast AM2 www.willburt.com Will-Burt warrants its AntennaMast™ to be free from defects in material and workmanship for a period of two (2) years, with such time period running from the date of shipment by Will-Burt. Will-Burt shall not be responsible for any damage resulting to or caused by its pr…

6, www.willburt.com The maximum payload for the mast is 22.6 kg / 50 lbs total. The payload weight should be evenly distributed around or divided per arms on the mast. For example, if you have 4 arms and a total payload of 22.6 kg / 50 lbs, place 5.65 kg / 12.5 lbs on each arm. …

17, www.willburt.com 29. Stake the Guy Lines: Align the guy stakes to coincide with the four holes on the guy collar on the top of the mast (not required to align for the swivel collar since it automat- ically adjusts to the stakes) and place 90 ° apart. Drive each stake, with the hammer …

12, 13 14 15 12 www.willburt.com 12. Insert the Top Tube: Loosen the center clamp. Re- trieve the top tube (not the base tube). Insert the tube from the top of the tripod with the locating notches to- ward the ground. Take note of small dimple in one of the locating notches on the bottom o…