Perle IOLAN SDS Operation & User’s Manual

223, 223 VPN Remote Validation Criteria Field Descriptions When the Authentication Method is set to X.509 Certificate, you can configure the remote validation criteria. The information in the remote X.509 certificate must match exactly the information configured in this window in order to succes…

256, I/O UDP 256 IOLAN SDS/SCS/STS User’s Guide, Version 3.5 Analog Section The Analog Section of the UDP packet is comprised of I/O data for each enabled Analog channel. z Section Length—The total length of the Analog section (this value will vary, the field length is 2 Bytes). This v…

331, RADIUS and TACACS+ 331 RADIUS ATTRIBUTE Perle-Line-Access-Port-30 130 integer Perle ATTRIBUTE Perle-Line-Access-Port-31 131 integer Perle ATTRIBUTE Perle-Line-Access-Port-32 132 integer Perle ATTRIBUTE Perle-…

281, 281 Alerts Syslog Overview The IOLAN can be configured to send system log messages to a syslog daemon running on a remote host if the Syslog service is activated. You can configure a primary and secondary host for the syslog information and specify the level for which you want syslog inform…

382, SCS48C/SCS32C/SCS16C/SCS8C Starter Kit (Adapters/Cable) 382 IOLAN SDS/SCS/STS User’s Guide, Version 3.5 …

259, Perle IOLAN SDS 259 Modbus I/O Access Modbus TCP Application If you have a Modbus RTU or Modbus ASCII program, you can access the I/O by connecting to the IOLAN over the network. Modbus I/O Access The section defines the function codes and registers you will need to access the I/O through Modbus TCP, Modbus …