Wittus H530 Installation And User Manual

4, Specifications UL 1777 Listed chimney liner (with a 6” (15cm) diameter) up through the block off plate of an existing masonry chimney, a zero-clearance chimney, or Class A, UL-103 HT, 6” (15cm) diameter chimney Dimensions (h x w x d) – 21 ” x 28 ” x 18 ” (53cm x 70cm…

10, Lighting the stove 1. Make sure the air vent is in the fully open position (move the handle to the left as shown by the wide end of a triangle). 2. Add crumbled paper / firelighters and kindling wood to the bottom of the fire box (combustion chamber). 3. The kindling (about 3 lbs or…

11, Wittus H530 5. TROUBLESHOOTING Combustion problems can arise if the combustion conditions are not optimal. This can be corrected by following the advice given below. Lighting and burning problems are usually due to wet wood or insufficient draft. Version: 10/09 Page 11 …

5, Set up and Installation To minimize the weight of the insert before installation, it is possible and simple to dismount the door by lifting it up and pulling it out of the lower hinge. The wood holder in the combustion chamber should not be removed. Illustration I: Place the insert i…

3, Version: 10/09 Page 3 Safety and Environmental Testing The H530 Inserts have been tested by OMNI-Test Laboratories, Inc. of Portland, Oregon and are listed to UL 1482 and ULC S628. They are also EPA certified. Features and Items Included Your H530 has a built in convec…

7, To fit the insert into the zero-clearance firebox, the following items may be removed: damper, ember catches, fire grate, doors, and viewing screen or curtains. The smoke shelf or baffle can also be removed if done without cutting the material or permanently altering the fireplace stru…