TS-market EDIC-mini LCD Operation Manual

36, Profile setup Time and date setup Formatting Formatting Number selection Sample rate selection Hours and minutes setup Compression type selection Date and month setup VAS turning on/off Year setup Yes / No LINE/CYCLE (quantity of circles) ENTER ENTER ENTER ENTER DOWN DOWN DOWN DOWN DOWN 36 37 …

24, supplied software. (See the diagram in the enclosed paper) First admission level (USER): only recording is possible in the DVR. Second admission level (OPERATOR): Record, Playback, Erasing and Tuning modes are available. Third admission level (ADMIN): complete admission to all modes…

8, 8 9 DVR Operating Prestarting procedures Battery installation We do recommend that only the batteries, produced by well known manufacturers should be used in the DVR. In this case you may expect your DVR to work continuously. Other battery types of the same dimen…

20, To format the memory, press the button. By pushing the button left or right, select YES and press the button again. DONE will appear on the display. Push the button up to return to the Setup mode. If you do not want to format the memory, select NO, press the button or push it up. The …

18, 18 You can change the profile parameters using the Setup mode. (See Setup mode) We recommend you to select the profile before recording. For that, push the button down three times, you will go to the Tuning mode. Then press the button, and by pushing it right or left, select a profile (…

14, TS-market EDIC-mini LCD 15 To continue recording, press the button once again. If you push the joystick down, recording will stop, the DVR will go to Standby mode. If trere is no more free memory,the DVR will automatically go to Sleeping mode. Recording may be saved either in the cycle buffer mode or …