Seiko 7B26 Product Manual

6, English English 10 English English 11 STANDARD CHARGING TIME Illumination Light source Condition (Example) Time required for Time required for Time required for 1 x (LUX) fully charging the charging the charging the watch watch to start watch to run for moving …

27, English English 52 English English 53 The watch moves depending on the quartz movement (loss/gain: ±15 seconds per month). After the manual time setting, if the watch successfully receives a time signal, the watch displays the time based on the time information it receives. Pull o…

33, English English 64 English English 65 Trouble Possible cause The watch was moved while it was receiving radio signals. The watch was left where radio signals were weak or where it could not receive radio signals. Transmitting stations may have stopped transmitting time si…

5, Seiko 7B26 English English 8 English English 9 THE SCREW LOCK TYPE CROWN The crown can be locked to prevent operating errors. HOW TO OPERATE SCREW LOCK TYPE CROWN - Unscrew the crown before the crown operation. - Screw in the crown when the operation is over. [To unscrew the crown] Turn the …

12, English English 22 English English 23 EUROPE (DCF77 from Germany) The reception range from the transmitting station is approximately 1,000 km (1,000 km radius of Mainflingen transmitting station). There are three time zones within the reception range. 1000 km Mainfling…

7, English English 12 English English 13 ENERGY DEPLETION FOREWARNING FUNCTION The energy depletion forewarning function is activated when the energy stored in the watch runs low. In such a case, the second hand moves at two-second intervals. If the watch continues to …