TV One Multimedia Solutions 1T-FC-766 Instruction Manual

3, 3 Table of Contents 1.0 Introduction 3 2.0 Specifications 6 3.0 Checking Package Contents 7 4.0 Connecting The Hardware 7 5.0 Operating The Unit 8 6.0 Troubleshooting 10 7.0 Limited Warranty 10 8.0 Regulatory Compliance 12 9.0 Contact Information 12 …

9, TV One Multimedia Solutions 1T-FC-766 9 If the SDI monitor does not display a signal properly, you will need to “clone” the EDID characteristics of an HDMI monitor, one that matches the resolution characteristics of the SDI monitor you intend to use, into the 1T-FC-766. To clone the HDMI monitor’s EDID inform…

4, 4 1.0 INTRODUCTION Thanks for purchasing the 1T-FC-766 HDMI to 3G SDI Converter product from TV One. The 1T-FC-766 HDMI to 3G SDI Converter allows HDMI signals to be displayed on an SDI monitor. The high Bitrate processing of 2.970 Gbit/s ensures fast signal transmission without…

8, 8 Lastly, connect the AC adapter to the unit and then to the AC source. Make sure that the Power LED illuminates. 5.0 OPERATING THE UNIT Note: Before you begin to familiarize yourself with the 1T-FC-766 HDMI to 3G SDI Converter, make certain that your HDMI source is supported by …

10, 10 Notes: 1) A DVD’s HDMI default timing is often set on 480p but SDI does not support that timing so it’s possible that the image will not display on the SDI monitor. To avoid such an event, it’s suggested that you set the source output timing to the “AUTO mode” so that the …