SHOWTEC Scanmaster 2 MKII Operation & User’s Manual

10, 8 Editing a scene 1) Enter program mode. 2) Press the BANK Up/Down button (11) to select the bank containing the scene you wish to edit. 3) Select the scene you wish to edit by tapping its SCENE button (2). 4) Use the faders and/or joystick to make the desired adjustments to the scene. 5) Once you h…

15, SHOWTEC Scanmaster 2 MKII 13 MIDI Control MIDI Channel Setting 1) Press and hold down the MIDI button (17) for 3 seconds. The display may show you: "ln:01". This means the current Midi channel is "01". 2) Use the BANK Up/Down button (11), to select the DMX channel 01 -16 you wish to assign…

5, 3 • If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. • If your Showtec device fails …

4, 2 WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: - be qualified - follow the instructions of this manual Before y…

3, 1 2 2 3 4 4 4 6 6 6 7 7 7 8 8 8 8 8 8 9 10 10 10 10 10 10 10 11 11 11 11 12 12 12 12 12 12 12 13 13 14 14 14 14 15 15 16 Showtec Showtec Scanmaster 2 MKII™ Product Guide Warning..…...................................................................................………………

16, 14 FILE TRANSFER File Transfer allows the user to transfer all information stored in one Scanmaster 2 MKII to a second Scanmaster unit. You must connect the units using 3-pin XLR cables. The unit sending the information will have the cable plugged into the DMX Out plug, and the recei…