Signal NVR 2708 Operation & User’s Manual

51, - 51 - 10. MENU: Opens the main menu. 11. EXIT: Close menu windows 12. EXTRA: For the future use. 13. Navigation/Enter: • : Move cursor in menus up; • : Move cursor in menus right; • : Move cursor in menus left; • : Move cursor in menus down; • Enter: In menus, pr…

50, - 50 - Pic 3.5.4 version info Appendix 1.Remote controller operation The remote control is the secondary input device For navigating the system’s interface. To use the remote control: 1.STANDBY:Press to turn standby mode ON/OFF. 2. LOGIN/LOCK: If "Securi…

19, Signal NVR 2708 - 19 - make sure that there are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to 3.5.1) 【Length】Set the time length of each video file. 60minutes is default value. 【Pre-Record】Record 1-30 seconds before the action. (time length is deci…

26, - 26 - 【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】Support 29 language at present:S- Chinese,T-Chinese,English,Farsi,Finnish,French, Greek,Hungarian, It…

5, - 5 - press buttons 0~9 to input passwords and user IDs; during playback, press the following: 5) : Increase reverse playback speed 1X, 2X, 4X 6) : Press to freeze playback to one frame, then press again to advance frame-by-frame 7) : Press to start playback 8) : Press to slow playback…

21, - 21 - Note：During backup you can exit the page layout to carry out other functions. 【Burning】the file will be burned synchronously after click it. 【Erase】Choose the file to delete and click erasure to delete the file. 【Stop】Stop the backup. 3.2 Alarm Fu…