SignaMax FO-098-8080 Operation & User’s Manual

22, 18 ♦ Pressing the F2 key will exit OSD MENU and start SCAN operation. NOTE: Only PCs that are powered on can be switched.  SCAN INTERVAL ♦ While the EDIT AREA is active, press the F1 key to switch to this area, and the “SCAN INTERVAL” will blink; then you can…

19, SignaMax FO-098-8080 15 bank boundary. • The right button is CH+. Push this button to advance to the next powered-on PC in the cycle, and it will cross the bank boundary. If the CH+ button is pushed and held over 1 second, the SCAN LED will be lit, and the buzzer will beep twice; now the F…

25, 21 DIP SWITCH SETTINGS DIP SWITCHES 1-3 are used to set the Bank Address: DIP Switch Number 1 2 3 ON ON ON BANK 0 Master OFF ON ON BANK 1 Slave ON OFF ON BANK 2 Slave OFF OFF ON BANK 3 Slave ON ON OFF BANK 4 Slave …

6, 2 a more user-friendly operating environment. The CommandView model FO-098-8080 can control 8 PCs in standalone operation; in case more PCs are needed, up to 8 levels of switching can be chained together to allow a maximum of 64 PCs sharing one console. A …

8, 4 Package Contents CommandView Model FO-098-8080 KVM Switch DB37 male to male Chain Cable User’s Manual AC Power Adapter Rack mount accessories Rubber foot pad x 1 x 1 x 1 x 1 x 2 x 4 …