Solectek SKYWAY-LM SERIES Operation & User’s Manual

29, 29 IMPORTANT NETWORK CONFIGURATION WARNINGS: Note that if no Gateway exists on the network, insure that no default gateway IP Address is entered in the network settings. It has been found that with computers running Windows, specifying a default Gateway where none exists can resul…

54, Solectek SKYWAY-LM SERIES 54 Figure 7-5: System Firmware Update Screen WARNING: DO NOT INTERRUPT OR POWER-DOWN DURING UPDATE. A potential system image corruption may occur. The update process may take 3 to 5 minutes. Upon completion, software will automatically reboot the system.  Once the update is f…

4, 4 6.6 Link Quality ............................................................................................................................ 33 6.7 Telco Lines .................................................................................................................…

24, 24 5.4 Changing Antenna Polarization (Andrew Only) Adjusting polarization depends on the antenna manufacturer and model. As a reference, the following example is shown for the Andrew ValuLine series. The steps involved in changing polarization with other antenna will be differe…

34, 34 6.7 Telco Lines The Telco Lines Tab, shown in Figure 6-6, presents information on the E1/T1 telco interfaces. For each active line, Signal Loss status, Alarm Indication Status (AIS), and Driver Failure Mode (DFM) status is provided. Note that status is provided only for the nu…