Slingbox Solo Quick Start Manual

4, SCART/COMPOSITE CONNECTION • Remove the composite A/V cable from the A/V Pack. • Connect the composite A/V cable to your A/V source OUT. • Connect the other end of the composite A/V cable to the Slingbox IN connection. For SCART connections, use the supplied SCART to RCA adap…

10, TROUBLESHOOTING 1. If the power light is not on: Disconnect the power cable from both the Slingbox and the electrical outlet and reconnect them - making sure that they are secure. 2. If the network light is not on: Disconnect the Ethernet cable from the back of the Slingbo…

9, STEP 5: SOFTWARE SETUP Now that you have the Slingbox setup, you are ready to install the software. Before you begin, make sure your computer is on the same network as your Slingbox. Please go to http:// downloads.slingmedia.com and follow the instructions to download the latest SlingP…

6, STEP 3: CONNECT TO YOUR NETWORK • Remove the Ethernet cable from the accessories pack. • Plug one end of the Ethernet cable into the Slingbox NETWORK connection. • Connect the other end to your home network router. —or— ETHERNET JACK (Connected to Router) —or— SLINGL…

5, Slingbox Solo STEP 2: CONNECT REMOTE CONTROL IR CABLE • Remove the remote control IR cable from the accessories pack. • Connect the remote control IR cable to the IR connection on the Slingbox. • Place the remote control IR cable heads on the top or bottom of your DVR and/or Cable/Satelli…