Smartec STM-200 Operation & User’s Manual

12, SELECTING SCREEN MODE SCREEN MODE is used to select how the camera image is displayed on the screen. There are 5 options available. Use the QUAD button on the remote control to change the SCREEN MODE. CA1 Full display of the camera chosen to display on the screen. The screen is switched to …

19, VIDEO SYSTEM Select the video system that is used in your region. Use the following steps to set the video system. STEP ACTION 1 2 Press MENU and then move the horizontal bar to CONFIGURATION using or . Press or to display sub-menu of CONFIGURATION. 3 Locate horizontal bar at VIDEO SYSTEM an…

6, CHAPTER 1. FEATURES 7 DESCRIPTION 7 FEATURES 7 ACCESSORIES 7 CHAPTER 2. FRONT AND REAR PANEL 8 THE FRONT PANEL 8 THE REAR PANEL 9 CHAPTER 3. REMOTE CONTROL 10 CHAPTER 4. SETUP MODE 11 OVERVIEW 11 OSD WINDOW OF MAIN MENU 11 SELECTING SCREEN MODE 12 MOTION SETUP 13 TIME/DATE 14 PIC…

17, CAMERA ADJUSTMENT CAMERA ADJUST The picture quality of each camera can be adjusted by using the CAMERA ADJUST setup menu. This setup menu is composed of 7 options. CAMERA CA1 CONTRAST 25 BRIGHTNESS 25 COLOR 25 TINT * 25 SHARPNESS 01 SEQUENCE 03 SEC *) Tint is only activated in NTSC…

15, Smartec STM-200 STEP ACTION 1 2 3 Press MENU and then move the indication bar to DATE/TIME using or . Press or to display sub-menu of DATE/TIME. Move the indication bar to DATE FORMAT and select the format you want using or . 4 Move the indication bar to the item (DATE TIME) to be adjusted …

8, CHAPTER 2. FRONT AND REAR PANEL THE FRONT PANEL A. IR/LIGHT SENSOR Remote control sensor /Light sensor for detecting ambient light. A 8 …