Suzuki AN400 - SERVICE Service Manual

413, Steering / Handlebar: 6B-6 Steering Removal and Installation B705H16206011 Removal 1) Support the motorcycle with a jack or wooden block. 2) Remove the front box. Refer to “Front Box Removal and Installation in Section 9D (Page9D-18)”. 3) Remove the front forks. Refer to “Fr…

462, 9D-15 Exterior Parts: 3) Remove the screws and fasteners. 4) Remove the front leg shield (3) by disconnecting the turn signal light coupler (4), position light couplers (5) and headlight couplers (6). Side Leg Shield Removal and Installation B705H19406010 Removal 1) Remove the left a…

200, 1D-56 Engine Mechanical: Cylinder + Piston + Piston Ring Unit: mm (in) Conrod + Crankshaft Unit: mm (in) Throttle Body Item Standard Limit Compression pressure (Automatic de-comp. actuated) E-02, 19, 24, 54 1 060 – 1 140 kPa (10.6 – 11.4 kgf/cm 2 , 151 – 162 psi) 660 kPa (6.0 kgf/cm 2 , 94 …

79, Engine General Information and Diagnosis: 1A-16 Show Data When Trouble (Displaying Data at the Time of DTC) B705H11104032 ECM stores the engine and driving conditions (in the form of data as shown in the figure) at the moment of the detection of a malfunction in its memory. This data is calle…

472, Suzuki AN400 - SERVICE 9E-3 Body Structure: Side-stand Removal and Installation B705H19506016 Removal 1) Support the motorcycle with the center stand. 2) Remove the side-stand. Refer to “Side-stand Construction (Page9E-2)”. Installation Install the side-stand. Refer to “Side-stand Construction (Page9E-2)”. Center…

173, Engine Mechanical: 1D-29 Cylinder Head and Related Parts Inspection B705H11406014 Cylinder Head Distortion 1) Decarbonize the combustion chambers. 2) Check the gasket surface of the cylinder head for distortion. Use a straightedge and thickness gauge. Take clearance readings a…