Prosharp AS 2001-Allpro Original Instructions Manual

3, Prosharp AS 2001-Allpro page 3 4. Guard against electric shock. Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators) 5. Keep other persons away. Do not let persons, especially children, not involved in the work touch the machine or the extension …

12, page 12 b. Use a flat template to set a correct height on the heel of the blade so that the grinding wheel will not make the heel rounded. Then by pressing the “SHARP” button start the grinding. Push the button again to turn the skate-holder device back just befor…

15, page 15 Change of the grinding wheel Changing of the wheel and all service work may only be done when the main power is switched off. But before switching the power off please read these instructions. Drive the skate-holder to the left by using the arrows at “SPEED” . …

1, page 1 AS 2001- Allpro ORIGINAL INSTRUCTIONS Read the installation and operating instructions carefully before using the machine. Usage that is not in accordance with the instruction manual and/or disregard safety instruction, may cause injur…

13, page 13 8. Important! If you wish to reset the grinding push quickly 2 times the “SHARP” button when the skate-holder is going from left to right. When the skate- holder is moving from right to left only one push is needed for “reset”. Never start the machin…