Supermicro SUPER X7SPA-L Operation & User’s Manual

9, 4-2 Main Setup ...................................................................................................... 4-2 4-3 Advanced Setup Congurations...................................................................... 4-4 4-4 Security Settings ...................................…

64, Supermicro SUPER X7SPA-L Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X7SPA-L/X7SPA-H/ X7SPA-HF. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setu…

65, 4-2 X7SPA-L/X7SPA-H/X7SPA-HF How to Start the Setup Utility Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility. From the main menu, you can access the …

13, 1-4 X7SPA-L/X7SPA-H/X7SPA-HF User’s Manual X7SPA-HF Image Note: All graphics shown in this manual were based upon the latest PCB Revision available at the time of publishing of the manual. The motherboard you've received may or may not look exactly the same as the graphics show…

85, 4-22 X7SPA-L/X7SPA-H/X7SPA-HF Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot Device. The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 5th boot device and Disabled. 1st Boot Device - 1st Floppy Drive�…

87, 4-24 X7SPA-L/X7SPA-H/X7SPA-HF guration parameters can take effect. Select Save Changes and Exit from the Exit menu and press <Enter>. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system conguration, and reboot …