Supermicro X8STI Operation & User’s Manual

86, Supermicro X8STI 4-16 X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User’s Manual Load SAS Option ROM (X8STi-3F Only) This feature is to load the Serial Attached SCSI (SAS) option ROM, if available. The options are Disabled and Enabled. Boot Graphics Adapter Priority Use this feature to select the graphics contro…

53, Chapter 2: Installation 2-29 LSI 1068E NIC4 LED JBMC1 2-7 Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts be- tween two pins to change the function of the connecto…

83, Chapter 4: AMI BIOS 4-13 over 137 GB, your system must be equipped with a 48-bit LBA mode addressing. If not, contact your manufacturer or install an ATA/133 IDE controller card that supports 48-bit LBA mode. The options are Disabled and Auto. Block (Multi-Sector Transfer) Block Mode boosts th…

50, 2-26 X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual LSI 1068E NIC4 LED JBMC1 Serial_Link-SGPIO Pin Denitions Pin# Denition Pin Denition 1 NC 2 NC 3 Ground 4 DATA Out 5 Load 6 Ground 7 Clock 8 NC T-SGPIO 0/1 & 3-SGPIO 0/1 Headers Two T-SGPIO (Serial-Link G…

48, 2-24 X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual LSI 1068E NIC4 LED JBMC1 A. Overheat/Fan Fail LED B. NIC3_LED (X8STi-LN4) C. NIC4_LED (X8STi-LN4) Overheat/Fan Fail LED The JOH header is used to connect an LED to provide warnings of chas- sis overheat. This LED will also bli…

52, 2-28 X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual LSI 1068E NIC4 LED JBMC1 A. PWR Supply Failure B. UID A B Power Supply Failure Connect a cable from your power supply to the Power Supply Failure header at JPWF to provide a warning of power supply failure. This warning signa…