Suntek HT-002LI Operation & User’s Manual

12, Page10 4.1.18 Enter Password If the password setting is selected as On, after switching on the camera, the LCD screen on camera will prompt to enter password. The default password is off. It can be changed where the steps are as following: a) Press MENU to display the setting menu…

3, Page1 1. Instructions 1.1 General Description This camera, a digital trail, is a surveillance camera working automatically. It can be triggered at once by any movement of human (or animals) in a certain region of interested (ROI) monitored by a high sensitive Passive Infrared (PI…

6, Page4 3. Easy Operation 3.1 Power Supply Open the battery cover. Conrm that the power switch is at the OFF position, load the fully charged lithium battery into the depot. Push back the battery cover. When in Test Mode, camera will be automatically shut down to save power if w…

4, Page2 1.4 Shooting Information Display When the camera is turned on (the power switch is slid to TEST position), the shooting information will bedisplayed in the monitor. 1.5 Supported Format Item Format Photo JPG Video AVI File FAT32 Here are some important notices. You …

8, Page6 4.1.3 System Setting 4.1.4 Fix the setting by software on the computer You can x all the 3 setting parts by software on the computer. Run the MMSCONFIG.exe le from MMSCONFIG folder in CD. Note: pls move all the les in the root directory of MMSCONFIG folder …

13, Suntek HT-002LI Page11 Appendix I: Technical Specications Image Sensor Type(True Megapixels) 12 Mega Pixels Color CMOS Memory SD Card 8MB~32GB Lens F=3.1; FOV=60° Size 160mm ﹡ 120mm ﹡ 50 mm IR Filter Full Automatic IR Filter TFT Display Screen 48x35.69mm (2.36");480(RGB)﹡234DOT; 16…