Sunrunner SFB-18 Operation & User’s Manual

11, 2008/4/30 11 Battery Case Features ˙Main Switch Function The LED Light on the controller and battery case utilizes the 1W Warm White LED Light which is green energy and provides moderate light in the dark. ˙The battery gauge with 4 battery level indicators precisely indicate the rem…

3, 2008/4/30 3 Introduction Thank you for purchasing the SUNRUNNER ® APT ® Power Assist Folding Electric Bicycle (hereinafter referred to as “E-Bike”) is designed and manufactured by PIHSIANG MACHINERY MFG. CO., LTD. (hereinafter referred to as “PMMC”). The user’s manual cont…

10, 2008/4/30 10 Check the battery specification or consult your authorized dealer. Stop charging immediately and check if there is a problem with the charger or the batteries. Caution 1. Make sure the DC output connected to the battery to be charged is at the rated voltage, or it may cause …

12, Sunrunner SFB-18 2008/4/30 12 Steps to fold the E-Bike Refer to the instruction for Dismounting Battery Case to remove the battery case. Loosen the clamp lever to remove the saddle. Note: Keep the battery case and the saddle in …

15, 2008/4/30 15 7 8 Refer to the instruction for Mounting Battery Case to be mounted. Install the saddle and adjust it to the desired height and then tighten the clamp lever. Note: For your safety, do not …

9, 2008/4/30 9 Battery and Charging Steps to charge the Battery Operating Instruction 1. Must assure the input voltage is between 100V~240V. 2. Must assure the battery to be charged is a LiFePO 4 (Lithium Iron Phosphate Based) Battery Pack supplied by PMM…