ProBoat Miss Elam Plus Owner's Manual

12, 12 With the transmitter antenna up, maneuver the Miss Elam in an oval, turning only to the right at slow to medium speeds. Make certain that the boat and radio system are functioning correctly. As you are running the Miss Elam in an oval, watch for water being discharged from the water ou…

11, 11 Note: The Zenoah ® G26M carburetor is factory adjusted to deliver optimum performance. See the Zenoah Engine manual for fine-tuning adjustments and other helpful information to make your RC boating experience trouble-free. Priming the Engine Press the priming bulb several…

6, ProBoat Miss Elam Plus 6 Parts Required Plywood boat stand pieces (4) Tools and Adhesives Needed CA or epoxy  1. Attach the side boat pieces by interlocking them into the end pieces as shown.  2. Secure the interlocking boat stand with medium thick CA or epoxy. Make certain you allow the CA or epox…

8, 8  4. Plug the switch harness into both the receiver and the battery box following the instructions provided with the radio. Secure the radio box cover with the hex head screws. Transmitter Batteries  1. Remove the transmitter from the box.  2. Remove the battery cover on the bottom …

20, 8956 © 2006 Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, Illinois 61822 (877) 504-0233 www.horizonhobby.com Printed in China www.proboatmodels.com …