Pro Charging Systems 4818CC Manual, Safety, Installation And Operating Instructions

7, 7 PROBLEM: A green LED was illuminated before disconnecting the power from the charger, but upon reconnection, red LEDs appear and remain on. This is the normal operating procedure for the system. It indicates that a reanalysis of the battery status was initiated and after a seri…

3, Pro Charging Systems 4818CC 3 PERSONAL SAFETY PRECAUTIONS Always read all instructions before using your charger! 1. Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery. Have plenty of fresh water and soap nearby in case battery acid contacts skin, cl…

4, 4 INSTALLATION AND PREPARATION To reduce risk of battery explosion, follow these instructions, those published by the battery manufacturer, and by the manufacturer of any equipment that you intend to use in the vicinity of battery. Review all cautionary markings on the…

8, 8 Please call Pro Charging Systems, LLC for full warranty information and/or service please call (800.742.2740). Important Installation and Charging Notes This charger is equipped with two (2) different charging profiles. The first, our intuitive DeltaVolt technology profile i…

5, 5 DO NOT attempt to attach a charger to a battery pack if the output of the charger does not match the battery pack voltage. Example: Model i-3625 is a 36 volt output charger and is only usable on 36 volt battery systems. Charger and battery damage can occur. Be extra cautiou…

2, 2 LaVergne, TN 37086-3539 INSTRUCTIONS FOR THE FOLLOWING BATTERY CHARGER MODELS: For lead-acid batteries with capacities of 150 to 350 ampere-hours (20 HR rating): MODEL AC SUPPLY DC Output Battery System 4815CC 120 volts, 60 Hertz 1…