Smoke hollow 1800CGS Assebly And Operation Manual

14, 14 Step 15: Assemble Smoke Stack and Charcoal Grill Lid Locate: Smoke Stack Assembly, Smoke Stack Lid, (6) M6x15 bolts, (4) M6 KEPS nuts, (1) small spring, (1) M6 Cap nut, (1) Heat Indicator, (1) Lid handle, (2) Hinge Pins , (2) “R” Clips Procedure: Refer to Fig. 1…

3, 3 Read all safeguards and assembly instructions before assembling and operating your grill/smoker. Before assembling your new grill/smoker, unpack all the parts from the box. Carefully remove all packing material and lay out all the parts for easy access and identification.…

7, 7 1800CGS Parts List Item NO. Quantity Description Part NO. 1 1 Side Burner Wire Grid Rack TR001 2 1 Side Burner Assembly TR002 3 1 Side Burner Housing TR003 4 4 Gas Valve Control Knobs TR004 5 1 Igniter with Wire TR005 6 1 HVR assembly with Side B…

22, Smoke hollow 1800CGS 22 Rules for smoking: We recommend that most smoking be done at 225 to 250 degrees. We also recommend the use of an oven thermometer to verify the inside temperature of your smoker and a meat thermometer to check the temperature of the meat. The heat indicator will give you an indicatio…

8, 8 Assembly Note: Carefully cut the tape holding the carton together. Cut the carton so that it can lay flat on the ground to provide a clean surface for assembling your Grill. Remove the packing materials and all the parts from inside the Cabinet. After unpacking all the parts, check to…

12, 12 Assembly Step 11 Fig.11 Step 10: Attach Firebox Lid Handle Locate: Firebox Lid Handle, (2) M6x15 bolts Procedure: Refer to Fig.10 Lift the Lid up and insert (2) M6x15 bolts from the INSIDE of the Lid to attach the Handle and Lid Step 12 Fig.12A Fig.12B Fi…