Powerten 3300I Series Programming Manual

21, Powerten 3300I Series M520087-01 3-6 All IEEE 488.2 programmable common routines can be categorized under the following headings. 1. Simple Device I/O Send Receive 2. Multiple Device I/O Sendlist 3. Simple Device Control Device Clear Read Status Byte In addition to the IEEE 488.2 rou…

7, M520087-01 vi TABLE OF CONTENTS Chapter 1 DESCRIPTION OF EQUIPMENT___________________________________ 1-1 1.1 PURPOSE AND CAPABILITIES _______________________________________________ 1-1 1.2 TECHNICAL CHARACTERISTICS_____________________________________________ 1-1 …

23, M520087-01 3-8 The IEEE 488.2 Address Switch is located on the rear panel, next to the IEEE 488.2 connector. The address switch, see Figure 3-2, is an eight bit DIP-switch with the function as explained below: 12 3 4 5678 1 0 1. Address bit 0 6 Not Used 2. Address bit 1 …

30, M520087-01 4-5 Meter Full-Scale Calibration The full-scale adjustment for the digital panel meters M1 and M2 is adjusted by R8 and R11, respectively, of the display assembly 10-010-086-00. R8 is for full-scale current meter calibration and R11 is for full-scale voltage meter calibration. …

14, M520087-01 2-1 Chapter 2 INSTALLATION 2.1 INSPECTION Inspect the shipping carton for possible damage before unpacking the unit. Carefully unpack the equipment. Save all packing materials until inspection is complete. Verify that all items listed on the packing slips have b…